Electrical Engineer - Embedded Hardware
- Red Cat Holdings
- West Palm Beach, Florida
- Full Time
Job DetailsJob Location: BlueOps (FL) - West Palm Beach, FL 33411Position Summary
The Electrical Engineer I – Embedded Hardware will support the design, development, testing, and integration of embedded electronic systems for unmanned maritime and sensor platform applications. This role is part of a collaborative engineering team and contributes to delivering reliable, high-performance systems in demanding operational environments.
This is a position suited for a motivated engineer who is eager to learn, hands-on, and capable of supporting technical efforts across multiple stages of development.
Essential Duties and Responsibilities
Assist with schematic capture and PCB layout using KiCad, Altium, Fusion 360, or similar ECAD tools
Support development of embedded electronics and interface boards
Assist with component selection, BOM generation, and documentation updates
Perform board bring-up, bench testing, and debugging activities
Support integration of sensors, GPS receivers, radios, Ethernet devices, and embedded computer systems
Assist with cable and connector verification
Participate in hardware design reviews and troubleshooting sessions
Support prototype assembly and lab testing
Document test results, configurations, and engineering changes
Assist with environmental and field-testing activities as needed
Required Qualifications
BS in Electrical Engineering or related field
Internship, academic project, or co-op experience in electronics design
Familiarity with embedded hardware systems
Interest in robotics, maritime systems, autonomous systems, or defense technologies
Strong willingness to learn in a fast-paced engineering environment
Basic analog and digital circuit knowledge
Familiarity with PCB design tools
Experience with lab equipment such as oscilloscopes, multimeters, and power supplies
Understanding of communication protocols such as UART, CAN, SPI, a I2C, or Ethernet
Basic soldering and hardware troubleshooting skills
Exposure to embedded systems or microcontrollers
Physical Requirements and Working Conditions
Must be able to walk, stand, and navigate large indoor and outdoor facilities for extended periods of time.
Ability to lift, carry, and move materials and equipment weighing up to 25 lbs on a regular basis.
Use of personal protective equipment (PPE) may be required in designated areas or when performing specific tasks, in accordance with safety protocols and company policy.
May be required to climb ladders, stoop, kneel, or crouch during inspections, maintenance walk-throughs, or emergency response situations.
Regular exposure to facility operations including noise, dust, temperature fluctuations, and industrial equipment.
Occasional off-hours or weekend work required for emergency facility responses or projects as needed
Requires frequent use of a computer and other standard office equipment for documentation, communication, and coordination tasks.
Background Check
This position will require successfully completing a post-offer background check. Qualified candidates with a criminal history will be considered and are not automatically disqualified, consistent with federal and state law.
EEO and ITAR/EAR Work Authorization Disclosure
Red Cat Holdings provides equal employment opportunities (EEO) to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This position requires direct or indirect access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). Successful candidates for positions subject to ITAR/EAR restrictions must provide proof of U.S. Citizenship or Permanent Residence and must not require sponsorship for export-restricted work authorization.
E-Verify
The company participates E-Verify ensure eligibility for employment and compliance with Right to Work rules.
Compensation: Base pay, plus generous annual equity package and potential bonuses.
Qualifications
The Electrical Engineer I – Embedded Hardware will support the design, development, testing, and integration of embedded electronic systems for unmanned maritime and sensor platform applications. This role is part of a collaborative engineering team and contributes to delivering reliable, high-performance systems in demanding operational environments.
This is a position suited for a motivated engineer who is eager to learn, hands-on, and capable of supporting technical efforts across multiple stages of development.
Essential Duties and Responsibilities
Assist with schematic capture and PCB layout using KiCad, Altium, Fusion 360, or similar ECAD tools
Support development of embedded electronics and interface boards
Assist with component selection, BOM generation, and documentation updates
Perform board bring-up, bench testing, and debugging activities
Support integration of sensors, GPS receivers, radios, Ethernet devices, and embedded computer systems
Assist with cable and connector verification
Participate in hardware design reviews and troubleshooting sessions
Support prototype assembly and lab testing
Document test results, configurations, and engineering changes
Assist with environmental and field-testing activities as needed
Required Qualifications
BS in Electrical Engineering or related field
Internship, academic project, or co-op experience in electronics design
Familiarity with embedded hardware systems
Interest in robotics, maritime systems, autonomous systems, or defense technologies
Strong willingness to learn in a fast-paced engineering environment
Basic analog and digital circuit knowledge
Familiarity with PCB design tools
Experience with lab equipment such as oscilloscopes, multimeters, and power supplies
Understanding of communication protocols such as UART, CAN, SPI, a I2C, or Ethernet
Basic soldering and hardware troubleshooting skills
Exposure to embedded systems or microcontrollers
Physical Requirements and Working Conditions
Must be able to walk, stand, and navigate large indoor and outdoor facilities for extended periods of time.
Ability to lift, carry, and move materials and equipment weighing up to 25 lbs on a regular basis.
Use of personal protective equipment (PPE) may be required in designated areas or when performing specific tasks, in accordance with safety protocols and company policy.
May be required to climb ladders, stoop, kneel, or crouch during inspections, maintenance walk-throughs, or emergency response situations.
Regular exposure to facility operations including noise, dust, temperature fluctuations, and industrial equipment.
Occasional off-hours or weekend work required for emergency facility responses or projects as needed
Requires frequent use of a computer and other standard office equipment for documentation, communication, and coordination tasks.
Background Check
This position will require successfully completing a post-offer background check. Qualified candidates with a criminal history will be considered and are not automatically disqualified, consistent with federal and state law.
EEO and ITAR/EAR Work Authorization Disclosure
Red Cat Holdings provides equal employment opportunities (EEO) to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This position requires direct or indirect access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR). Successful candidates for positions subject to ITAR/EAR restrictions must provide proof of U.S. Citizenship or Permanent Residence and must not require sponsorship for export-restricted work authorization.
E-Verify
The company participates E-Verify ensure eligibility for employment and compliance with Right to Work rules.
Compensation: Base pay, plus generous annual equity package and potential bonuses.
Qualifications
Job ID: 520897898
Originally Posted on: 5/12/2026
Want to find more Engineering opportunities?
Check out the 141,442 verified Engineering jobs on iHireEngineering
Similar Jobs
Sign Up for Job Alerts
