Electrical Engineer - SCADA and Analytical Services 5+ Years

Electrical Engineer - SCADA & Analytical Services - 5+ Year Roles and Responsibilities POWER Engineers, Inc. is seeking a 5+ year Electrical SCADA/Studies Engineer. This position is for the Freeport, Maine office, with the ability to work hybrid. The successful applicant will be responsible for performing electrical studies and/or developing and troubleshooting supervisory control and data acquisition (SCADA) systems for utility and industrial/commercial clients. Applicable power systems primarily include conventional and renewable generation facilities, substations, transmission systems, and distribution systems. Activities will include one or more of the following: Protective Relaying: short circuit and symmetrical component analysis, time-current coordination, protection scheme and criteria development, relay settings calculation, integration with SCADA systems, NERC compliance, and arc flash analysis. Applicable software: AcSELerator Quickset (SEL-5030), AcSELerator Architect, GE Enervista, ASPEN Oneliner, SKM-PTW, ETAP, RSCAD/RTDS Power System Planning Studies: steady-state real and reactive power flow including outage contingencies, generation interconnect feasibility, P-V and Q-V analysis for voltage stability margins, dynamic stability performance, automation of large batch simulations, working with models from NERC regional entities (WECC, MRO, SERC etc.), NERC compliance. Applicable Software: PSS/E, PSLF, PowerWorld, Python Scripting Design Studies: substation grounding, corona and electric and magnetic fields, insulation coordination (lightning, switching surge, and contamination performance), transient (time domain) simulation, power quality (harmonics, voltage flicker, over/under voltage, etc.), motor starting, AC interference (transmission line interaction with railroads and pipelines). Applicable Software: CDEGS, ATP-EMTP, PSCAD Networking and Communications: design and configure network and communication paths for Remote Terminal Units (RTUs), protective relays, meters, Human Machine Interface (HMIs), PLC's and other SCADA system equipment; develop basic specifications for fiber optic, microwave, power line carrier, or radio communication paths; travel to project sites to troubleshoot and commission network and communication systems. Applicable network and communication protocols: DNP, Modbus, SEL Communication Protocol, Goose Messaging, IEC 61850 Logic and Control Systems: develop and implement logic and control schemes for remote and local operation of power system equipment; develop programs on various platforms for implementation of these schemes; travel to project sites to test and commission the control schemes. Applicable Logic and Control Platforms: SEL RTAC, Orion, Cooper SMP, GE-D20 Data Acquisition: Prepare points lists of all data to be transferred between control centers and controlled apparatus, assign and program data addressing and routing information, develop Human Machine Interface (HMI) screens, travel to project sites to test and commission data transfer schemes. Applicable Software: Wonderware, Clearview, AcSELerator RTAC, Visual Basic, OSIPI, Python scripting, etc. The successful applicant must demonstrate aptitude in the following: Integrity Initiative and self sufficiency Spoken and written communication Troubleshooting and problem solving Interpersonal relations Organization Required Education/Experience BSEE (BS Electrical Engineering), BSEET (BS Electrical Engineering Technology), or BSCE (BS Computer Engineering) degree, from an ABET-accredited university At least Five (5) years of industry experience performing design or device configuration in technical disciplines described in the Roles and Responsibilities section Must be willing to travel on occasion Must have strong troubleshooting skills Desired Education/Experience Preference is given to applicants with any of the following: Power system courses covering topics such as three-phase power, load flow and reactive compensation, protective relaying, symmetrical components, transmission line theory, power system transients, dynamic stability, and power system electromagnetics Internships and experience in the technical areas and software listed in the Job Description section Engineer In Training (EIT) certification, with the expectation to work toward professional engineering registration (PE) Experience in mentoring others and/or providing technical leadership in customer-focused engineering projects POWER Engineers, Member of WSP, is a global consulting environmental and engineering firm and one of the top design firms in the energy sector. Together, POWER and WSP's 73,000 experts create positive, long-lasting impacts for our communities and our clients in the power and energy, transportation and infrastructure, environmental, and property and buildings sectors. As part of our team, you'll discover a world of opportunities to connect with innovative thinkers, forge your path, and have fun tackling the world's most challenging projects. At POWER Engineers, Member of WSP, you can have a rewarding career on every level. Our philosophy is simple: Do Good. Have Fun. Build Success. Our compensation package includes competitive compensation, professional development, and a full benefit package: Medical/Dental/Vision Paid Holidays Vacation/Paid Sick Leave Voluntary Life Insurance 401K Telehealth Benefit covers all providers Maternity and Paternity Leave New Dads and Moms Benefit program Fertility Benefits Gender affirming care We are a fun engineering firm. That might seem contradictory to some, but it works for us! Salary DOE POWER Engineers, Member of WSP, is an Equal Opportunity Employer, including women, minorities, veterans, and individuals with disabilities.